No. 188, Xinhai Street,Yantai, Shandong, China
Tel: +86 13846095456
Raymond Mill
- Introduction
- Raymond Mill has a strong performance of becoming a complete set with a production system independently.
- Capacity
- 0.6～2.5t/h
- Product improvement
- All important parts of raymond mill are made of high quality steel, and all wear-resistant parts are made of high-performance wearresistantmaterials. The whole machine has high wear resistance and reliable operation.
Advantages
- Dimensional structure, small floor area.
- strong performance become a complete set with a production system independently.
- Even fineness of finished powder and qualified screening rate of 99%, which is difficult to reach for other millingequipment.
- The transmission device of the main engine adopts a sealed gear box and pulley, with smooth transmission and reliableoperation.
- Electrical system adopts centralized control, and the grinding workshop can realize unmanned operation with easymaintenance.
Application
Mainly used for the high-fine powder processing of over 280 varieties of non-flammable and non-explosive materialswith the Mohs hardness of no more than 9.3, and humidity of below 6%, such as barite, calcite, feldspar, talc, marble,limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock,gypsum, glass, and insulation materials, in such industries as mine, chemical and construction.
Paramètre technique
| Model | 3R2115 | 3R2615 | 3R2715 | 3R3016 | 4R3216 | ||
|---|---|---|---|---|---|---|---|
| Milling Roller | Number | 3 | 3 | 3 | 3 | 4 | |
| Diameter (mm) | 210 | 260 | 270 | 300 | 320 | ||
| Height (mm) | 150 | 150 | 150 | 160 | 160 | ||
| Milling Ring | Inner Diameter (mm) | 630 | 780 | 830 | 880 | 970 | |
| Height (mm) | 150 | 150 | 150 | 160 | 160 | ||
| Max. Feed Size (mm) | 15 | 15 | 15 | 20 | 25 | ||
| Finished Product Size (mm) | 0.044~0.165 | 0.044~0.165 | 0.044~0.165 | 0.044~0.165 | 0.044~0.165 | ||
| Main Motor Power (kW) | 15 | 18.5 | 22 | 30 | 37 | ||
| Finish ProductFineness (mm) | 0.125 | Output(t/h) | 1.2~1.8 | 1.8~2.5 | 2.3~2.8 | 0.6~1.2 | 3.2~4.5 |
| 0.075 | 0.6~1.2 | 1.2~1.8 | 1.8~2.3 | 1.9~2.6 | 2.4 ~3.1 | ||
| 0.044 | 0.6~1.0 | 0.8~1.2 | 0.9~1.7 | 1 ~1.9 | 1.8~2.5 | ||